Route paired controller QoS data through the existing GIP protocol layer and
expose the latest gamepad report through the C API. Add a SwiftUI monitor for
buttons, d-pad, triggers, and stick positions without registering a native HID
device.
Co-Authored-By: openai/gpt-5.6-luna: GIP bridge and live input monitor
Port the MT76 client functions (send_wlan, associate_client,
pair_client, set_client_key, remove_client) and wire the RX dispatch
into the session: EP IN frames are parsed, ASSOC_REQ associates a
controller (WCID plus chip programming), PAIR_REQ replies with
PAIR_RESP, and DISASSOC or client-lost removes it. The C API exposes
connected controllers and the app lists them by MAC. Bumps
xone_cli/xone_app to C++23: they were falling back to the default
standard once mt76.hpp started using std::span. Adds a unit test pinning
the WCID regions, the 32-byte rxwi, and the new frame control values.
Co-Authored-By: qwen3.8-27b@q2_k_xl: client functions, RX dispatch, GUI list
Complete the radio bring-up sequence: init_registers now writes the
upstream register values (PBF out of reset, beacon TX off), crystal
calibration, MAC/BSSID programming, channel evaluation, and beacon
programming through an MCU burst into PBF shared memory. The beacon
txwi is the full 20-byte struct and the RF patch is applied on the
cold firmware path.
Download firmware per product (xone_dongle_02e6.bin / 02fe.bin) and
add the xone_cli debug tool (info, firmware, radio-init/deinit, burst,
reg-read/write, led, recover). Recover uses USBDeviceReEnumerate for a
host-side port reset.
Co-Authored-By: grok4.6: internet search (firmware split, beacon SRAM, upstream issues)
Co-Authored-By: qwen3.8-27b@q2_k_xl: initial radio init and CLI implementation
Co-Authored-By: deepseek/deepseek-v4-pro-0813: final radio init fixes and verification
Add chip::load_firmware(): validates the xow_dongle.bin header, DMAs
the ILM and DLM images in 0x3800-byte chunks over EP 0x04 OUT with
FCE completion polling, then loads the IVB and waits for the firmware
to start. Probe now issues a USB reset first (port of
usb_reset_device), matching xone_dongle_probe.
The chip keeps its firmware across a USB reset on macOS and does not
set the upstream reset-complete bit, so load_firmware falls back to
the running firmware when the chip is still alive. Verified on
hardware: fresh load and re-plug both return success.
Add scripts/download-firmware.sh (port of install/firmware.sh), which
fetches the driver CAB from Windows Update and extracts
firmware/xow_dongle.bin, hash-verified.
Co-Authored-By: qwen3.8-27b@q2_k_xl: ported firmware load and download script
Add the mt76::chip class on top of the USB transport: 32-bit register
read/write via vendor requests, register polling, and EFUSE reads with
the kick/control sequence from transport/mt76.c. Expose chip_id() and
mac_address() (with the 62:45:bd fallback).
Verified on hardware: chip ID 0x7612 (MT7612) and MAC address read
from EFUSE.
Co-Authored-By: qwen3.8-27b@q2_k_xl: ported register and EFUSE layer
portersky