Convert the remaining west-const declarations in xone_api.h to east
const so the whole file matches the controller functions added later.
Update the AGENTS.md C bridge section: east const applies to the C
header too; only trailing returns are exempt.
Co-Authored-By: qwen3.8-27b@q3_k_xl: converted C API header to east const
Defer RSA, ECDH, and handshake completion until after each received packet
has been added to the authentication transcript, matching the upstream
workqueue ordering and preventing the controller from rejecting host secret.
Co-Authored-By: openai/gpt-5.6-luna: fixed GIP authentication ordering
Route paired controller QoS data through the existing GIP protocol layer and
expose the latest gamepad report through the C API. Add a SwiftUI monitor for
buttons, d-pad, triggers, and stick positions without registering a native HID
device.
Co-Authored-By: openai/gpt-5.6-luna: GIP bridge and live input monitor
The dongle beacon carries a pairing flag in the Microsoft OUI IE; with
it clear, controllers ignore the beacon. Port xone_dongle_toggle_pairing:
xone_set_pairing() rewrites the beacon with the flag set and blinks the
LED, the GUI button triggers it, EVT_BUTTON (dongle button) does too, and
the LED follows upstream state (blink while pairing, on when a controller
is connected, off otherwise). The CLI gains a pair command.
Log every inbound frame (info word + first 16 bytes) so the RX path can
be traced against hardware.
Co-Authored-By: qwen3.8-27b@q2_k_xl: pairing mode and RX logging
Port the MT76 client functions (send_wlan, associate_client,
pair_client, set_client_key, remove_client) and wire the RX dispatch
into the session: EP IN frames are parsed, ASSOC_REQ associates a
controller (WCID plus chip programming), PAIR_REQ replies with
PAIR_RESP, and DISASSOC or client-lost removes it. The C API exposes
connected controllers and the app lists them by MAC. Bumps
xone_cli/xone_app to C++23: they were falling back to the default
standard once mt76.hpp started using std::span. Adds a unit test pinning
the WCID regions, the 32-byte rxwi, and the new frame control values.
Co-Authored-By: qwen3.8-27b@q2_k_xl: client functions, RX dispatch, GUI list
Split the dongle session into a fast probe (xone_open) and a background
start (xone_start) that loads the firmware and initializes the radio on
a worker thread, so the app UI never blocks. Add xone_state/xone_error
for progress display, and select the firmware image per product ID when
no path is given. The Swift app polls the state each second and shows
idle/starting/ready/error plus the firmware build or error string.
The session destructor joins the worker so quitting the app does not
terminate on a joinable thread. Note in the CLI and transport that the
recover/re-enumerate path should not be used yet: a crashed SIE drops
off the bus, while the MCU watchdog recovers it after ~90s of quiet.
Co-Authored-By: qwen3.8-27b@q2_k_xl: async C API, Swift state display, and exit-time worker join
Complete the radio bring-up sequence: init_registers now writes the
upstream register values (PBF out of reset, beacon TX off), crystal
calibration, MAC/BSSID programming, channel evaluation, and beacon
programming through an MCU burst into PBF shared memory. The beacon
txwi is the full 20-byte struct and the RF patch is applied on the
cold firmware path.
Download firmware per product (xone_dongle_02e6.bin / 02fe.bin) and
add the xone_cli debug tool (info, firmware, radio-init/deinit, burst,
reg-read/write, led, recover). Recover uses USBDeviceReEnumerate for a
host-side port reset.
Co-Authored-By: grok4.6: internet search (firmware split, beacon SRAM, upstream issues)
Co-Authored-By: qwen3.8-27b@q2_k_xl: initial radio init and CLI implementation
Co-Authored-By: deepseek/deepseek-v4-pro-0813: final radio init fixes and verification
Add an opaque xone_dongle session handle to the C ABI bridge:
xone_open() probes, resets, and loads the firmware (path optional),
and xone_pid/xone_chip_id/xone_mac_address/xone_firmware_build return
debug info for the open session. chip captures the firmware build
string from the image header during load.
The Swift app opens a session when the dongle appears and shows PID,
chip ID, MAC address, and firmware build string in a debug section.
Co-Authored-By: qwen3.8-27b@q2_k_xl: added C API session handle and debug UI
Add chip::load_firmware(): validates the xow_dongle.bin header, DMAs
the ILM and DLM images in 0x3800-byte chunks over EP 0x04 OUT with
FCE completion polling, then loads the IVB and waits for the firmware
to start. Probe now issues a USB reset first (port of
usb_reset_device), matching xone_dongle_probe.
The chip keeps its firmware across a USB reset on macOS and does not
set the upstream reset-complete bit, so load_firmware falls back to
the running firmware when the chip is still alive. Verified on
hardware: fresh load and re-plug both return success.
Add scripts/download-firmware.sh (port of install/firmware.sh), which
fetches the driver CAB from Windows Update and extracts
firmware/xow_dongle.bin, hash-verified.
Co-Authored-By: qwen3.8-27b@q2_k_xl: ported firmware load and download script
Add the mt76::chip class on top of the USB transport: 32-bit register
read/write via vendor requests, register polling, and EFUSE reads with
the kick/control sequence from transport/mt76.c. Expose chip_id() and
mac_address() (with the 62:45:bd fallback).
Verified on hardware: chip ID 0x7612 (MT7612) and MAC address read
from EFUSE.
Co-Authored-By: qwen3.8-27b@q2_k_xl: ported register and EFUSE layer
Replace the stub probe with a real IOKit/IOUSBFamily transport:
discovery by VID/PID, device and interface connections, vendor
control requests on EP0, bulk writes to EP 0x04 OUT, and an async
read pump (EP 0x05 IN / EP 0x04 IN) on a dedicated CFRunLoop
thread with disconnect notification.
Add the test_usb suite, link IOKit/CoreFoundation into xone_usb,
and update the README investigation checklist.
Co-Authored-By: qwen3.8-27b@q2_k_xl: implemented USB transport layer
Port the GIP protocol and authentication layers from medusalix/xone
into the C++ stack:
- crypto: SHA-256/HMAC (CommonCrypto), RSA PKCS#1 (Security.framework),
and a self-contained P-256 ECDH validated against OpenSSL vectors
- auth: v1 (RSA) and v2 (ECDH) handshake state machine
- gip: header/varint/chunk handling and packet dispatch, with the kernel
device model replaced by transport + client_listener interfaces
Adds test_crypto, test_auth, and test_gip suites.
Co-Authored-By: deepseek (deepseek/deepseek-v4-pro-0813): ported crypto, auth, and GIP
Add the CMake build for the Swift + C++ macOS port, mirroring the
refix layout: deps/ modules (Platform, Flags, Sanitizers, FindUnity),
per-module static libraries (usb, auth, mt76, gip, hid, api), a Swift
app entry point with a pure C bridge header, and a Unity test suite
behind BUILD_TESTING.
Swift requires the Ninja or Xcode generator; a guard in
CMakeLists.txt rejects anything else.
Co-Authored-By: qwen (qwen/qwen3.8-27b@q2_k_xl): scaffolded CMake build + tests
portersky