a6168a16c7
Remove some unused experimental code.
2019-03-05 17:50:19 +10:00
180621a0f4
Remove some redundant TODOs.
2019-03-05 17:48:31 +10:00
10f13312bf
DirectSound: Revert an earlier commit.
...
The change this commit is reverting causes glitching with smaller
buffers for some reason. More investigation into this is required.
2019-03-05 17:27:49 +10:00
e0c7af2966
DirectSound: Force a minimum latency of 20 milliseconds.
2019-03-04 20:28:59 +10:00
944b5aca72
Clean up the WASAPI backend.
2019-03-04 19:29:43 +10:00
413be80e2f
WASAPI: Get playback-only mode working again.
2019-03-04 19:14:42 +10:00
dd15fb4515
WASAPI: Get capture-only mode working again.
2019-03-04 18:49:35 +10:00
e8d390925f
DirectSound: Small latency tweak to make consistent with WASAPI.
2019-03-04 18:14:09 +10:00
1f65090c32
DirectSound: Silence a verbose debug output message.
2019-03-04 17:42:48 +10:00
fd3e0e2a43
WASAPI: Fix a possible infinite loop when stopping the playback device.
2019-03-04 17:39:20 +10:00
c56205ff11
WASAPI: Fix some errors when stopping the device.
2019-03-03 22:01:29 +10:00
c95afa6b18
WASAPI: Work in progress on refactoring.
...
Playback-only and capture-only modes are broken with this commit.
2019-03-03 21:26:48 +10:00
2f7eef3a41
DirectSound: Fix a bug in playback-only mode.
2019-03-03 17:35:48 +10:00
286b301739
Rearrange some code.
2019-03-03 17:20:45 +10:00
e00f3ddefa
DirectSound: Drain the playback buffer when stopping the device.
2019-03-03 17:18:45 +10:00
2e1c34e678
DirectSound: Full-duplex experiment for handling desyncs.
2019-03-03 14:57:09 +10:00
679f450099
DirectSound: Clean up unused code.
2019-03-03 14:21:23 +10:00
3b1555ae5d
Clean up.
2019-03-03 13:26:26 +10:00
2660dd5fcb
DirectSound: Refactor the playback-only implementation.
2019-03-03 12:50:33 +10:00
74c22ad77f
DirectSound: Refactor the capture-only implementation.
2019-03-03 12:20:52 +10:00
349abe5ac8
DirectSound: Add some verbose debug output.
...
This commit also experiments with a fix for glitching in full-duplex
mode.
2019-03-03 08:37:43 +10:00
be780d2558
Work in progress on refactoring the DirectSound backend.
...
Playback-only and capture-only modes are broken with this commit for
DirectSound.
2019-03-02 21:13:37 +10:00
b0a1c92599
WASAPI: Experiment with some improvements to full-duplex.
2019-03-02 11:09:38 +10:00
595dd1fb9e
Merge pull request #49 from kayabe/dev_0.9
...
Fix vorbis playback
2019-03-02 06:50:34 +10:00
17f0adcce4
Fix vorbis playback
2019-03-01 18:13:27 +02:00
5aa63802ae
Update test_0.
2019-03-01 17:51:32 +10:00
fe8f67d3da
DirectSound: Capture bug fix.
...
This fixes a bug where the wrong position is being retrieved for the
capture device.
2019-03-01 17:51:21 +10:00
01a7d375f1
Try fixing a warning on MinGW.
2019-02-27 20:09:39 +10:00
ce0850848d
WASAPI: Fix some errors with automatic stream routing.
2019-02-27 19:15:39 +10:00
957de48d80
Another potential fix for some full-duplex glitching.
...
This change makes it so reading and writing is done on the smaller of
the period sizes between capture and playback devices.
2019-02-27 18:18:01 +10:00
997d8a8d9d
WASAPI/ALSA: Fix automatic playback starting in full-duplex mode.
...
The new rule is to start playback when the entire buffer is filled
rather than when the first period is filled in duplex mode. Normal
playback mode will still start the device when the first period is
filled.
2019-02-26 20:41:42 +10:00
1b957471d5
WASAPI: Fix errors with exclusive mode.
2019-02-26 19:54:07 +10:00
f35b705fd8
WASAPI: Add a missing "if" statement.
2019-02-26 19:37:00 +10:00
c7a17d65d5
Tweaks to the WASAPI backend.
...
This commit attempts to address a crackling issue in full-duplex mode.
* When the capture buffer becomes over-filled it will discard some
frames to prevent it from straddling the capacity of the internal
buffer and causing excessive overruns.
* A fix has been implemented to the function that retrieves the number
of available frames in the device's internal buffer.
* Low-latency shared mode (IAudioClient3) forces small buffer sizes so
a change has been implemented which bypasses low-latency shared mode
when a large buffer is specified.
2019-02-26 19:33:38 +10:00
cf59525ef3
Experimental fix for full-duplex on WASAPI.
2019-02-25 18:25:19 +10:00
008cb41617
API CHANGE: Reorder parameters for some APIs.
...
The APIs that have changed are those that take an output pointer and an
input count in the format of "some_read_function(handle, pBuf, count)".
The updated APIs include:
* mal_decoder_read_pcm_frames()
* mal_pcm_converter_read()
Some APIs are scheduled to be replaced in a future version so I have
decided not to replace this at this time since it will be a waste of
time to do so.
2019-02-25 18:15:00 +10:00
9ed608a452
Update simple playback example.
2019-02-24 21:01:53 +10:00
08e21aae05
Add LICENSE file.
2019-02-24 20:40:34 +10:00
8f67ba93cf
Simplify Win32 #include's.
2019-02-24 20:31:29 +10:00
5b5d51cf68
Update project files.
2019-02-24 20:12:28 +10:00
125383e9ea
Fix some warnings.
2019-02-24 20:07:09 +10:00
01f04b249e
More full-duplex bug fixes.
2019-02-24 20:03:50 +10:00
26a218c1af
Fix some full-duplex errors.
2019-02-24 19:04:49 +10:00
433b7e8ed6
Fix a bug in the ring buffer.
2019-02-24 17:47:08 +10:00
bd689c560e
Fix Core Audio build.
2019-02-24 17:39:07 +10:00
0cc126245e
Work on full-duplex with Core Audio.
2019-02-24 16:43:37 +10:00
a9ac84dde2
Work on full-duplex for JACK.
2019-02-24 16:11:27 +10:00
1e1e8c0ba1
More full-duplex work on OpenSL and AAudio.
2019-02-24 15:53:20 +10:00
66412f8937
Add some notes for the new resampler.
2019-02-24 13:28:04 +10:00
5b4b7fa266
More work on full-duplex with WebAudio.
2019-02-24 13:26:18 +10:00
David Reid
Kayabe